NOTE: No longer available – retired product. Please, check the Tinusaur Starter 2 bundle.
The Tinusaur Starter is a beginners’ kit that will help you start with microcontrollers and the Tinusaur particularly.
Here is the list of everything included in the Tinusaur Starter:
| Name | Description |
| PCB | Tinusaur Board |
| MCU, Attiny85 | Atmel AVR ATtiny85 microcontroller |
| Socket, DIP-8 | DIP-8 socket for MCU |
| H1, Header | Header 2×4, Female |
| H2, Header | Header 2×5, Female |
| ISP, Header | Header 2×5, Male, for ISP |
| RESET, Button | Tactile push button, for RESET |
| Power, Header | Header 1×2, Male, for external power |
| Battery, Header | Header 1×2, Male, for battery power on/off |
| Battery, Jumper | Jumper, 2-pin, for battery power on/off |
| C1, Capacitor | Capacitor 100uF, Low profile 5×5 mm |
| C2, Capacitor | Capacitor 100nF, Small |
| R1, Resistor | Resistor 10K, Small, 1/8W |
| Battery holder | Battery holder for CR2032 |
| Battery 3V | Battery 3V, CR2032 |
| LED1, LED | LED, 3mm, red |
| LED2, LED | LED, 3mm, green |
| Resistor (LED1) | Resistor 330 ohm, Small, 1/8W, for LED |
| Resistor (LED2) | Resistor 330 ohm, Small, 1/8W, for LED |
| Header (LED1) | Header 1×2, Male, for LED |
| Header (LED2) | Header 1×2, Male, for LED |
| ISP Programmer | USB ASP, 10-pin connector, with cable |
For information about purchasing visit our Where to buy page.