The Tinusaur Shield LEDx2 is an add-on board for the Tinusaur Board that has 2 LED’s on it and everything else that is necessary to make it work. It consists of 2 LED’s, 2 resistors, 1 PCB board, 1 2×4 and 1 2×5 male header.
The primary purpose of this board is to make the LED work with the Tinusaur Board.
IMPORTANT: Please note that …
- In order to use the shield, you will need a Tinusaur Board to put it on.
- This is a kit, you have to assemble it yourself.
Here is the list of everything included with the Tinusaur Shield LEDx2:
|Shield, PCB||Shield LEDx2 PCB|
|H1, Header||Header 2×2, Male (1)|
|H2, Header||Header 2×5, Male|
|LED1, LED||LED, 3mm, red|
|LED2, LED||LED, 3mm, green|
|Resistor (LED1)||Resistor 330 ohm, Small, 1/8W, for LED (2)|
|Resistor (LED2)||Resistor 330 ohm, Small, 1/8W, for LED (2)|
- (1) In some older models, the header is 2×4.
- (2) The resistor could be in different colors. Its value is marked with a color code – the color stripes on its body. Ref.: Wikipedia.org / Electronic color code – Resistor_color-coding
For information about purchasing visit our Where to buy page.