{"id":2929,"date":"2019-01-21T13:10:37","date_gmt":"2019-01-21T11:10:37","guid":{"rendered":"http:\/\/tinusaur.org\/?p=2929"},"modified":"2022-01-01T23:03:24","modified_gmt":"2022-01-01T21:03:24","slug":"launched-crowdfunding-campaign-for-the-tinusaur-oled-display-kit","status":"publish","type":"post","link":"https:\/\/tinusaur.org\/2019\/01\/21\/launched-crowdfunding-campaign-for-the-tinusaur-oled-display-kit\/","title":{"rendered":"Launched crowdfunding campaign for the Tinusaur OLED Display Kit"},"content":{"rendered":"\n

We have just launched our crowdfunding campaign at Crowd Supply<\/a> for the Tinusaur OLED Display Kit<\/a> – a bundle of boards and modules that allows you to connect an ATtiny85<\/a> microcontroller to an SSD1306<\/a> OLED display<\/a>. This is a kit so you have to assemble the boards yourself by soldering the parts to the PCB thus start learning about electronics and physics. It might sound complicated at first but these Tinusaur boards<\/a> are very easy to assemble using the guides<\/a> and tutorials that we provide. Once all the boards are assembled you could connect a DHT11<\/a> sensor module, measure temperature and humidity and show the results on the screen.<\/p>\n\n\n\n

\"Tinusaur<\/a>
Tinusaur OLED Display \u041ait<\/figcaption><\/figure>\n\n\n\n

With the Tinusaur OLED Display Kit<\/a>, you get everything you need to start: the Tinusaur main board with the ATtiny85 microcontroller, the LED shield for test and learning, the OLED display shield, the SSD1306 OLED display, the DHT11 sensor module, a LiPo battery kit, and, a USBasp programmer.<\/p>\n\n\n\n

\n