{"id":3283,"date":"2019-09-30T16:55:03","date_gmt":"2019-09-30T14:55:03","guid":{"rendered":"http:\/\/tinusaur.org\/?page_id=3283"},"modified":"2022-01-01T23:04:03","modified_gmt":"2022-01-01T21:04:03","slug":"pcb","status":"publish","type":"page","link":"https:\/\/tinusaur.org\/free\/pcb\/","title":{"rendered":"Free PCB"},"content":{"rendered":"\n

Free Tinusaur Board 4 PCB<\/h3>\n\n\n\n

Congratulations! \ud83d\ude42 You’ve got a free Tinusaur Board ver. 4.x PCB.<\/p>\n\n\n\n

For a limited time, you could order the parts for your Free PCB<\/a> at a 20% discount by applying the PARTS20OFF<\/strong> promo code at check out. <\/p>\n\n\n\n

\n\n\n\n

Parts List<\/strong><\/p>\n\n\n\n

These are all the parts that you will need to assemble your free PCB.<\/p>\n\n\n\n

MCU, ATtiny85, DIP<\/td>ATtiny85 microcontroller<\/td><\/tr>
Socket, DIP-8<\/td>Socket, DIP-8<\/td><\/tr>
Header 2×4 F<\/td>Main board header 1<\/td><\/tr>
Header 2×5 F<\/td>Main board header 2<\/td><\/tr>
Resistor, 10K<\/td>Pull-up resistor for the RESET line<\/td><\/tr>
Capacitor, 100 nF<\/td>Capacitor for the power lines<\/td><\/tr>
Capacitor, 100 uF<\/td>Capacitor for the power lines<\/td><\/tr>
Jumper header 2×2, M<\/td>Switch RST \/ PB3<\/td><\/tr>
Jumper cap<\/td>Switch RST \/ PB3<\/td><\/tr>
Button, tactile, 2-pin<\/td>RESET button<\/td><\/tr>
Header 2×5 M, shrouded<\/td>ISP header<\/td><\/tr>
Jumper header 1×2, M<\/td>Battery disconnect<\/td><\/tr>
Jumper cap<\/td>Battery disconnect<\/td><\/tr>
Connector XH2.54-2P, M<\/td>External battery connector, pair 1of2<\/td><\/tr>
Battery holder<\/td>Battery holder for CR2032<\/td><\/tr>
Battery, CR2032<\/td>Coin cell battery, type CR2032<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

This is what the assembled boar should look like.<\/p>\n\n\n\n