Tinusaur Starter

NOTE: No longer available – retired product. Please, check the Tinusaur Starter 2 bundle.

The Tinusaur Starter is a beginners’ kit that will help you start with microcontrollers and the Tinusaur particularly.

Tinusaur Starter - contents

Here is the list of everything included in the Tinusaur Starter:

Name Description
PCB Tinusaur Board
MCU, Attiny85 Atmel AVR ATtiny85 microcontroller
Socket, DIP-8 DIP-8 socket for MCU
H1, Header Header 2×4, Female
H2, Header Header 2×5, Female
ISP, Header Header 2×5, Male, for ISP
RESET, Button Tactile push button, for RESET
Power, Header Header 1×2, Male, for external power
Battery, Header Header 1×2, Male, for battery power on/off
Battery, Jumper Jumper, 2-pin, for battery power on/off
C1, Capacitor Capacitor 100uF, Low profile 5×5 mm
C2, Capacitor Capacitor 100nF, Small
R1, Resistor Resistor 10K, Small, 1/8W
Battery holder Battery holder for CR2032
Battery 3V Battery 3V, CR2032
LED1, LED LED, 3mm, red
LED2, LED LED, 3mm, green
Resistor (LED1) Resistor 330 ohm, Small, 1/8W, for LED
Resistor (LED2) Resistor 330 ohm, Small, 1/8W, for LED
Header (LED1) Header 1×2, Male, for LED
Header (LED2) Header 1×2, Male, for LED
ISP Programmer USB ASP, 10-pin connector, with cable

For information about purchasing visit our Where to buy page.

Leave a Comment