PLEDGE: We will make the Tinusaur Car

The Tinusaur Car Prototype

As you may have noticed we’ve extended our campaign by a couple of days to allow more people to get their perks over the weekend.

We’re 175% over our original goal, $4522 raised – with 12 hours still left to go.

We’re so excited that we’ve decided to make this pledge: if we reach 200% or $5000 (whichever happens first) before the end of the campaign (i.e. in about 12 hours) we promise that we will make the Tinusaur Car – a 2-wheel mini car that can follow a line – and we will make it available on our website.

We are already building a working prototype.
(picture above)

What can you do to help us reach our next goal?

  1. Go to our campaign https://igg.me/at/tinusaur support us – get a perk.
  2. Share our campaign link https://igg.me/at/tinusaur with your friends or through your social media channels.

Wish us luck for the next 12 hours!
The Tinusaur Team.

Funded 140% and only 16 hours left

Tinusaur Indiegogo Campaign 140 percent

We are 140% funded and there are only 16 hours left of our Indiegogo campaign.

This would’ve not happened without your support. 🙂

By continuing to support our cause you will help us get even more Tinusaur kits to our students.

Not interested in getting a Tinusaur board? You can donate to the project! Our promise: we will spend the money to bring the Tinusaur boards to even more students … as we’ve done it before.

Neither of those is for you? No problem. You could just share our campaign link https://igg.me/at/tinusaur to your social media channels such like Facebook, Twitter, or whatever you prefer.

Just a quick reminder: After the campaign is over the price of the boards, the kits, and the shipping will go slightly up so now is the best time get a bunch them.

Thanks again for your support.

Indiegogo Campaign is Almost Halfway Through

Tinusaur Indiegogo Campaign

Last week we’ve launched our Indiegogo crowdfunding campaign and, as of a few minutes ago, we’ve reached 1/3-rd of our goal already. 🙂

In case you’re not familiar what the Tinusaur project is about …

A small board with a tiny chip on it that comes as an assembly kit – a small package with parts and you get the chance to learn how to solder it. This circuit is so simple that there are very few things that could go wrong. It’s been around for over 3 years and used in schools and universities to educate young people in both hardware and software. With this campaign, you could help us produce more of the Tinusaur boards, bring the cost down to $3 per basic “lite” board and allow more people to be able to get them.

Tinusaur Indiegogo Campaign

The Tinusaur boards are powered by the Atmel ATtiny85 microcontroller. You could program your Tinusaur board with the Arduino development environment, or if you chose so – using the plain old C/C++ compiler, or … using whatever you prefer.

The success of this campaign will help us produce our boards and kits in much larger quantities and bring the coast down. That will allow us to have the basic “lite” boards for as little as $3/pcs – that will make them available for even more people.

Help us spread the word – just share it. But, if you like the idea and the project, you could back us up. Here’s the link: https://igg.me/at/tinusaur.

Thanks in advance for your support.